X-Band Solid State Power Amplifier

Highly Efficient and Reliable Power Amplifier and Regulator

General Dynamics' space-qualified, X-Band Solid State Power Amplifier (SSPA) uses GaAs power MMIC technology providing high efficiency, high reliability, small size and low mass. This amplifier can be stacked with the HRT-150 to form a higher output power integrated transmitter unit. Included in the unit is a DC-DC power converter and regulator, specifically designed for the SSPA utilizing synchronous rectifier technology to maximize power conversion efficiency. General Dynamics’ flight heritage includes the Mars Exploration Rovers and the Mars Science Lab rover.

  • High efficiency
  • State-of-the-art GaAs MMIC technology
  • Small size and mass

Product Details


The X-Band Solid State Power Amplifier (SSPA) is designed for use as a companion unit to General Dynamics’ Small Deep Space Transponder (SDST), or it can be used as a stand-alone power amplifier. The SSPA also provides a full complement of analog telemetry signals, as well as direct access to selected functions for monitoring during subsystem and spacecraft ground testing. The SSPA operates in compression to maximize efficiency for constant envelope modulation, but can be ordered with Automatic Level Control (ALC) to maintain linear operation for modulation formats such as QPSK having a variable-envelope carrier.

  • 17 Watts typical output power
  • 7.8 - 8.8 GHz frequency range
  • Built-in DC-DC converter and regulator
  • 22 to 36 VDC input voltage
  • High efficiency (28%)
  • State-of-the-art GaAs MMIC technology
  • Small size and mass
  • S-level parts
  • Covers deep-space and nearearth frequency bands
  • Fully space qualified and radiation tolerant
  • EMC performance qualified to MIL-STD-461C
  • Options
    • Output ALC
    • On/off control
    • Current limiting
    • External power converter synchronization
  • Higher and lower output power levels



X-Band Solid State Power Amplifier

Data Sheet



View Document


RF Output Power: > 15 Watts (17 Watts typical)
Output Power Variation: ±0.25 dB over any 50 MHz band
Input Power: +1 dBm ±2 dB
Input/Output Impedance: 50 ohms
Input/Output VSWR: 1.5:1 maximum
Source/Load VSWR: 1.75:1 maximum
Output Protection: No damage, any VSWR, any phase
Spurious Outputs: < 60 dBc
Harmonic Outputs: < 30 dBc
RF Breakdown Margin: > 6 dB @ VSWR of < 10:1, any phase
User Interface RF Input: SMA-F
RF Output: SMA-F (optional waveguide flange)
DC Power Input: 21-socket Microminiature D
Telemetry/Direct Access: 25-Pin Microminiature D
Input Power Operating Voltage: 22 to 36 VDC
Over/Under Voltage: 0 to +22, +36 to +50 Vdc, no damage
Power: 65.5 Watts max (60 Watts nominal)
Isolation to Chassis: 1 to 100 megohms
Inrush Current Limiter: Optional (reduces efficiency ≈ 1%)
External Sync: 125 kHz ± 10% (optional)
General Maximum Dimensions: 6.85”L x 5.275”W x 1.85”H, excluding
mounting feet
Mass: 3.02 lbs (1.37 kg)
Protoflight/Qualification Temperature: -40°C to +70°C
Flight Acceptance Temperature: -40°C to +60°C
Vibration: 7.9 Grms (protoflight)
Pyrotechnic Shock: 2000 G
Altitude: Sea level to vacuum
Radiation: to 100 krads (Si)