Model 930A Antenna Control System
Full Featured Inverter Drive Control
Our latest Antenna Control System, the Model 930A, offers economical satellite tracking and control. It is ideally suited for single AC fixed antennas and includes an Antenna Control Unit (ACU), Internal Tracking Receiver (TRU) and a Power Drive Unit (PDU). The Model 930A is our intended replacement for our long-standing Model 7134 Antenna Controller and is backwards compatible with our reliable Model 7150 Power Drive Units. The 930A is supported 24/7/365 days a year by our technical support team.
- Precision Satellite Tracking and Control
- Ethernet Interface
- Full Software Upgradeability
- Tracking, Pointing, and Acquisition modes
- Ideal for single AC motor (per axis) antennas
- Stable to 5° inclined GEO targets
The General Dynamics SATCOM Technologies Model 930A Antenna Control System comprises an Antenna Control Unit (ACU), internal Tracking Receiver Unit (TRU) and a Power Drive Unit (PDU).
Antenna Control Unit
The Antenna Control Unit (ACU) is the primary control and monitor interface point for the entire system, featuring a friendly touch screen windowed interface.
- Easy touch screen operation
- Informative display with color readouts
- Extensive diagnostic monitoring and test capabilities
- Supervisory Control Link
- (Ethernet; TCP/IP or RS-232/422).
- Fully software field upgradable
- 950 - 2150 GHz L-Band input
- 45 dB - Hz C /N
- -80 to -10 dBm input
Portable Maintenance Unit
The Portable Maintenance Unit (PMU) provides manually commanded, bi-directional control of all axes.
- Hand held ruggedized unit with a pendant cable for convenient local operation at the antenna
- Backup means of moving antenna and is ACU independent
- Modes include position jog and Hi/Lo speed
- Optional weather proof access junction boxes at convenient antenna locations
- Extended low temperature operation
- Extended Warranty
- PDU configurable for various motor sizes and polarization controls.
- E-Stops in panel mount or J-Box
Multi-Speed Inverter PDU
The Power Drive Unit (PDU) provides digital control to the AC drive motors. It also provides controlled acceleration and deceleration profile & speed regulation range of up to 15:1 with conventional inverter rated AC motor (antenna system dependant).
The inverter PDU’s are free-standing, housed in an NEMA 4 (IP66 equivalent) aluminum enclosure and contains the electrical/mechanical components necessary to move the antenna. The PDU contains an internal fan for ambient air circulation and “hot spot” avoidance and an optional thermostat controlled, internal heater for cold weather operations.
A lockable handle secures the access door while the system is operating. A Lockout, Tagout power disconnect is provided on the cabinet exterior.
Communication within the system via Ethernet between ACU, TRU, and PDU by a dedicated controller. A second Ethernet controller and port provides independent connection to M&C or customer WAN.
System design minimizes cable installation cost and complexity, and allows for flexible site layout.
- 1:1 Resolver (standard)
- 0.0055° Resolution,
- 0.05° Accuracy
- Standard 16 bit
AC Motor Support
- Single or multiple inverter duty windings.
- Optional Handcrank interlock.
- 208-480v 3 phase voltage windings available.
- Overtemp interlock.
- Up to 5 HP standard, larger upon request.
Tracking Accuracy - Enhanced Memory Track
Normally better than 5% of the receive beamwidth in winds of 30 mph gusting to 45 mph, satellite inclination of up to 5º and signal scintillation of up to 2 dB.
Normally better than 10º of the receive beamwidth, RMS in winds of 30 mph gusting to 45 mph. This includes all drive train errors, but excludes structural errors between the position transducers and RF beam.
- Tracking accuracy ≤ 10% of Beamwidth
- Pointing accuracy ≤ 0.05° RMS
- Total system results are antenna (mechanically) dependent
- CE, FCC Class A compliant, Reach
|2RU rack mount chassis with slides||3.5" H x 19" W x 20" D||10 lbs||Single phase, 110-240 VAC 350 VA|
|AC Inverter or Single speed contactor.||36” H x 30” W x 10” D (54” H Including Floor Stand)||100 - 150 lbs||
Single Phase Electronics, 100-250 VAC 500 VA
208/380/415 VAC, 3ø, KVA motor dependent
Three Phase 200-240 Vac, 7.5 HP max
Three Phase 380-480 Vac, 10 HP max
Single speed 5HP max, 208/380/415 3 phase
|Operating-Indoor||0° to 50° C||95% Non-Condensing|
|Operating-Outdoor||-20° to 50° C||100% Condensing|
|Operating-Outdoor (optional extended)||-40° to 40° C||100% Condensing|
|Storage||-10° to 70° C||100% Condensing|