CM-400/450 Air Traffic Control Radios

This product has been discontinued

Please contact us to learn about alternatives or to receive support.

The CM-400/450 Series Version 2 radios are the latest additions to the General Dynamics family of Air Traffic Control (ATC) radios. Based on the FAA NEXCOM Segment 2 radio requirements, these rack mounted transmitter and receiver systems are specifically designed to meet the dynamic mission requirements of air traffic control centers, commercial airports, military air stations and range installations.

Features

The General Dynamics UHF and VHF Digital Radios deliver more modes and a broader frequency range in a rack mount, passively cooled chassis. Advanced modes, legacy AM voice interoperability, and VoIP facilitate current and future voice and data requirements.

Key Features

  • Multimode Functionality in one Software Defined Radio
  • VHF: AM 25 kHz and 8.33 kHz channel spacing
  • VHF: 117.975 - 136.975 MHz, optional 112 - 150 MHz
  • UHF: 225 – 399.975 MHz
  • 2 – 50 Watt RF output power
  • Remote control and maintenance capability with built-in test
  • 100% usable receive channels
  • Optional embedded co-site filter
  • Multiple keying and squelch options

Note: The CM-300 Series radios have replaced the CM-200/CM-400 radios. For support on CM-200/400 radios, please contact us at ATCinfo@gd-ms.com.

 

CM-400/450 (V2) Series Data Sheet

 

 

View Document

 

Frequency Range VHF: 112 –150 MHz
UHF: 225 – 399.975 MHz
Frequency Stability ≤ 1 ppm
Channel Spacing VHF: 25 kHz, 8.33 kHz
UHF: 25 kHz
Modulation VHF: A3E (Voice)
UHF: A3E (Voice)
Power Supply DC power supply: 24 V DC nominal (21.6 – 28.8 V)
AC power supply: 100 – 230 VAC, 47 – 63Hz
Automatic switchover AC-to-DC
Temperature Operating: –10°C to +50°C
Relative humidity: 90% at 40°C (noncondensing)
Storage: –40°C to +70°C
Data Interface Ethernet
Maintenance Local: Ethernet, IPV4
Remote: Ethernet IPV4 DHCP
Comprehensive: BIT, software upload
Setup functions: available on front panel keypad/display
Internal Measurements: Internal voltages, audio levels, Tx output power,
FWD power, REV power, VSWR, Rx AGC voltage, Temperature
Maintenance Data Terminal/Human Machine Interface
Standards ICAO SARPS
ETSI EN 300 676: VHF AM
ETSI EN 302 617: UHF AM
ETSI EN 301 489 (-1/-22)
EUROCAE ED-137A: VoIP
FAA-E-3014: VHF/UHF AM
VHF FCC Cert. IDs MIJCM300V2 - CM-300 (V2) VDT
MIJCM350V2 - CM-350 (V2) VDT

 

  • Features

    Features

    The General Dynamics UHF and VHF Digital Radios deliver more modes and a broader frequency range in a rack mount, passively cooled chassis. Advanced modes, legacy AM voice interoperability, and VoIP facilitate current and future voice and data requirements.

    Key Features

    • Multimode Functionality in one Software Defined Radio
    • VHF: AM 25 kHz and 8.33 kHz channel spacing
    • VHF: 117.975 - 136.975 MHz, optional 112 - 150 MHz
    • UHF: 225 – 399.975 MHz
    • 2 – 50 Watt RF output power
    • Remote control and maintenance capability with built-in test
    • 100% usable receive channels
    • Optional embedded co-site filter
    • Multiple keying and squelch options

    Note: The CM-300 Series radios have replaced the CM-200/CM-400 radios. For support on CM-200/400 radios, please contact us at ATCinfo@gd-ms.com.

  • Literature
  • Specifications

     

    CM-400/450 (V2) Series Data Sheet

     

     

    View Document

     

    Frequency Range VHF: 112 –150 MHz
    UHF: 225 – 399.975 MHz
    Frequency Stability ≤ 1 ppm
    Channel Spacing VHF: 25 kHz, 8.33 kHz
    UHF: 25 kHz
    Modulation VHF: A3E (Voice)
    UHF: A3E (Voice)
    Power Supply DC power supply: 24 V DC nominal (21.6 – 28.8 V)
    AC power supply: 100 – 230 VAC, 47 – 63Hz
    Automatic switchover AC-to-DC
    Temperature Operating: –10°C to +50°C
    Relative humidity: 90% at 40°C (noncondensing)
    Storage: –40°C to +70°C
    Data Interface Ethernet
    Maintenance Local: Ethernet, IPV4
    Remote: Ethernet IPV4 DHCP
    Comprehensive: BIT, software upload
    Setup functions: available on front panel keypad/display
    Internal Measurements: Internal voltages, audio levels, Tx output power,
    FWD power, REV power, VSWR, Rx AGC voltage, Temperature
    Maintenance Data Terminal/Human Machine Interface
    Standards ICAO SARPS
    ETSI EN 300 676: VHF AM
    ETSI EN 302 617: UHF AM
    ETSI EN 301 489 (-1/-22)
    EUROCAE ED-137A: VoIP
    FAA-E-3014: VHF/UHF AM
    VHF FCC Cert. IDs MIJCM300V2 - CM-300 (V2) VDT
    MIJCM350V2 - CM-350 (V2) VDT

     


Back to top